HBase

Since Camel 2.10

Both producer and consumer are supported

This component provides an idempotent repository, producers and consumers for Apache HBase.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-hbase</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Apache HBase Overview

HBase is an open-source, distributed, versioned, column-oriented store modeled after Google’s Bigtable: A Distributed Storage System for Structured Data. You can use HBase when you need random, realtime read/write access to your Big Data. More information at Apache HBase.

Camel and HBase

When using a datastore inside a camel route, there is always the challenge of specifying how the camel message will store to the datastore. In document based stores things are more easy as the message body can be directly mapped to a document. In relational databases an ORM solution can be used to map properties to columns etc. In column based stores things are more challenging as there is no standard way to perform that kind of mapping.

HBase adds two additional challenges:

  • HBase groups columns into families, so just mapping a property to a column using a name convention is just not enough.

  • HBase doesn’t have the notion of type, which means that it stores everything as byte[] and doesn’t know if the byte[] represents a String, a Number, a serialized Java object or just binary data.

To overcome these challenges, camel-hbase makes use of the message headers to specify the mapping of the message to HBase columns. It also provides the ability to use some camel-hbase provided classes that model HBase data and can be easily convert to and from xml/json etc.
Finally it provides the ability to the user to implement and use his own mapping strategy.

Regardless of the mapping strategy camel-hbase will convert a message into an org.apache.camel.component.hbase.model.HBaseData object and use that object for its internal operations.

Configuring the component

The HBase component can be provided a custom HBaseConfiguration object as a property or it can create an HBase configuration object on its own based on the HBase related resources that are found on classpath.

    <bean id="hbase" class="org.apache.camel.component.hbase.HBaseComponent">
        <property name="configuration" ref="config"/>
    </bean>

If no configuration object is provided to the component, the component will create one. The created configuration will search the class path for an hbase-site.xml file, from which it will draw the configuration. You can find more information about how to configure HBase clients at: HBase client configuration and dependencies

HBase Producer

As mentioned above camel provides producers endpoints for HBase. This allows you to store, delete, retrieve or query data from HBase using your camel routes.

hbase://table[?options]

where table is the table name.

The supported operations are:

  • Put

  • Append

  • Increment

  • Get

  • Delete

  • Scan

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The HBase component supports 5 options, which are listed below.

Name Description Default Type

poolMaxSize (common)

Maximum number of references to keep for each table in the HTable pool. The default value is 10.

10

int

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

configuration (advanced)

To use the shared configuration.

Configuration

Endpoint Options

The HBase endpoint is configured using URI syntax:

hbase:tableName

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

tableName (common)

Required The name of the table.

String

Query Parameters (16 parameters)

Name Description Default Type

cellMappingStrategyFactory (common)

To use a custom CellMappingStrategyFactory that is responsible for mapping cells.

CellMappingStrategyFactory

filters (common)

A list of filters to use.

List

mappingStrategyClassName (common)

The class name of a custom mapping strategy implementation.

String

mappingStrategyName (common)

The strategy to use for mapping Camel messages to HBase columns. Supported values: header, or body.

Enum values:

  • header

  • body

String

rowMapping (common)

To map the key/values from the Map to a HBaseRow. The following keys is supported: rowId - The id of the row. This has limited use as the row usually changes per Exchange. rowType - The type to covert row id to. Supported operations: CamelHBaseScan. family - The column family. Supports a number suffix for referring to more than one columns. qualifier - The column qualifier. Supports a number suffix for referring to more than one columns. value - The value. Supports a number suffix for referring to more than one columns valueType - The value type. Supports a number suffix for referring to more than one columns. Supported operations: CamelHBaseGet, and CamelHBaseScan.

Map

rowModel (common)

An instance of org.apache.camel.component.hbase.model.HBaseRow which describes how each row should be modeled.

HBaseRow

userGroupInformation (common)

Defines privileges to communicate with HBase such as using kerberos.

UserGroupInformation

maxMessagesPerPoll (consumer)

Gets the maximum number of messages as a limit to poll at each polling. Is default unlimited, but use 0 or negative number to disable it as unlimited.

int

operation (consumer)

The HBase operation to perform.

Enum values:

  • CamelHBasePut

  • CamelHBaseGet

  • CamelHBaseScan

  • CamelHBaseDelete

String

remove (consumer)

If the option is true, Camel HBase Consumer will remove the rows which it processes.

true

boolean

removeHandler (consumer)

To use a custom HBaseRemoveHandler that is executed when a row is to be removed.

HBaseRemoveHandler

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

maxResults (producer)

The maximum number of rows to scan.

100

int

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

Message Headers

The HBase component supports 7 message header(s), which is/are listed below:

Name Description Default Type

CamelHBaseOperation (producer)

Constant: OPERATION

The HBase operation to perform.

String

CamelHBaseMaxScanResults (producer)

Constant: HBASE_MAX_SCAN_RESULTS

The maximum number of rows to scan.

Integer

CamelHBaseStartRow (producer)

Constant: FROM_ROW

The row to start scanner at or after.

String

CamelHBaseStopRow (producer)

Constant: STOP_ROW

The row to end at (exclusive).

String

CamelMappingStrategy (common)

Constant: STRATEGY

The strategy to use for mapping Camel messages to HBase columns. Supported values: header body.

String

CamelMappingStrategyClassName (common)

Constant: STRATEGY_CLASS_NAME

The class name of a custom mapping strategy implementation.

String

CamelHBaseMarkedRowId (consumer)

Constant: HBASE_MARKED_ROW_ID

The marked row id.

byte[]

Put Operations.

HBase is a column based store, which allows you to store data into a specific column of a specific row. Columns are grouped into families, so in order to specify a column you need to specify the column family and the qualifier of that column. To store data into a specific column you need to specify both the column and the row.

The simplest scenario for storing data into HBase from a camel route, would be to store part of the message body to specified HBase column.

<route>
    <from uri="direct:in"/>
    <!-- Set the HBase Row -->
    <setHeader name="CamelHBaseRowId">
        <el>${in.body.id}</el>
    </setHeader>
    <!-- Set the HBase Value -->
    <setHeader name="CamelHBaseValue">
        <el>${in.body.value}</el>
    </setHeader>
    <to uri="hbase:mytable?operation=CamelHBasePut&amp;family=myfamily&amp;qualifier=myqualifier"/>
</route>

The route above assumes that the message body contains an object that has an id and value property and will store the content of value in the HBase column myfamily:myqualifier in the row specified by id. If we needed to specify more than one column/value pairs we could just specify additional column mappings. Notice that you must use numbers from the 2nd header onwards, eg RowId2, RowId3, RowId4, etc. Only the 1st header does not have the number 1.

<route>
    <from uri="direct:in"/>
    <!-- Set the HBase Row 1st column -->
    <setHeader name="CamelHBaseRowId">
        <el>${in.body.id}</el>
    </setHeader>
    <!-- Set the HBase Row 2nd column -->
    <setHeader name="CamelHBaseRowId2">
        <el>${in.body.id}</el>
    </setHeader>
    <!-- Set the HBase Value for 1st column -->
    <setHeader name="CamelHBaseValue">
        <el>${in.body.value}</el>
    </setHeader>
    <!-- Set the HBase Value for 2nd column -->
    <setHeader name="CamelHBaseValue2">
        <el>${in.body.othervalue}</el>
    </setHeader>
    <to uri="hbase:mytable?operation=CamelHBasePut&amp;family=myfamily&amp;qualifier=myqualifier&amp;family2=myfamily&amp;qualifier2=myqualifier2"/>
</route>

It is important to remember that you can use uri options, message headers or a combination of both. It is recommended to specify constants as part of the uri and dynamic values as headers. If something is defined both as header and as part of the uri, the header will be used.

Get Operations.

A Get Operation is an operation that is used to retrieve one or more values from a specified HBase row. To specify what are the values that you want to retrieve you can just specify them as part of the uri or as message headers.

<route>
    <from uri="direct:in"/>
    <!-- Set the HBase Row of the Get -->
    <setHeader name="CamelHBaseRowId">
        <el>${in.body.id}</el>
    </setHeader>
    <to uri="hbase:mytable?operation=CamelHBaseGet&amp;family=myfamily&amp;qualifier=myqualifier&amp;valueType=java.lang.Long"/>
    <to uri="log:out"/>
</route>

In the example above the result of the get operation will be stored as a header with name CamelHBaseValue.

Delete Operations.

You can also you camel-hbase to perform HBase delete operation. The delete operation will remove an entire row. All that needs to be specified is one or more rows as part of the message headers.

<route>
    <from uri="direct:in"/>
    <!-- Set the HBase Row of the Get -->
    <setHeader name="CamelHBaseRowId">
        <el>${in.body.id}</el>
    </setHeader>
    <to uri="hbase:mytable?operation=CamelHBaseDelete"/>
</route>

Scan Operations.

A scan operation is the equivalent of a query in HBase. You can use the scan operation to retrieve multiple rows. To specify what columns should be part of the result and also specify how the values will be converted to objects you can use either uri options or headers.

<route>
    <from uri="direct:in"/>
    <to uri="hbase:mytable?operation=CamelHBaseScan&amp;family=myfamily&amp;qualifier=myqualifier&amp;valueType=java.lang.Long&amp;rowType=java.lang.String"/>
    <to uri="log:out"/>
</route>

In this case its probable that you also also need to specify a list of filters for limiting the results. You can specify a list of filters as part of the uri and camel will return only the rows that satisfy ALL the filters.
To have a filter that will be aware of the information that is part of the message, camel defines the ModelAwareFilter. This will allow your filter to take into consideration the model that is defined by the message and the mapping strategy.
When using a ModelAwareFilter camel-hbase will apply the selected mapping strategy to the in message, will create an object that models the mapping and will pass that object to the Filter.

For example to perform scan using as criteria the message headers, you can make use of the ModelAwareColumnMatchingFilter as shown below.

<route>
    <from uri="direct:scan"/>
    <!-- Set the Criteria -->
    <setHeader name="CamelHBaseFamily">
        <constant>name</constant>
    </setHeader>
    <setHeader name="CamelHBaseQualifier">
        <constant>first</constant>
    </setHeader>
    <setHeader name="CamelHBaseValue">
        <el>in.body.firstName</el>
    </setHeader>
    <setHeader name="CamelHBaseFamily2">
        <constant>name</constant>
    </setHeader>
    <setHeader name="CamelHBaseQualifier2">
        <constant>last</constant>
    </setHeader>
    <setHeader name="CamelHBaseValue2">
        <el>in.body.lastName</el>
    </setHeader>
    <!-- Set additional fields that you want to be return by skipping value -->
    <setHeader name="CamelHBaseFamily3">
        <constant>address</constant>
    </setHeader>
    <setHeader name="CamelHBaseQualifier3">
        <constant>country</constant>
    </setHeader>
    <to uri="hbase:mytable?operation=CamelHBaseScan&amp;filters=#myFilterList"/>
</route>

<bean id="myFilters" class="java.util.ArrayList">
    <constructor-arg>
        <list>
            <bean class="org.apache.camel.component.hbase.filters.ModelAwareColumnMatchingFilter"/>
        </list>
    </constructor-arg>
</bean>

The route above assumes that a pojo is with properties firstName and lastName is passed as the message body, it takes those properties and adds them as part of the message headers. The default mapping strategy will create a model object that will map the headers to HBase columns and will pass that model the ModelAwareColumnMatchingFilter. The filter will filter out any rows, that do not contain columns that match the model. It is like query by example.

HBase Consumer

The Camel HBase Consumer, will perform repeated scan on the specified HBase table and will return the scan results as part of the message. You can either specify header mapping (default) or body mapping. The later will just add the org.apache.camel.component.hbase.model.HBaseData as part of the message body.

hbase://table[?options]

You can specify the columns that you want to be return and their types as part of the uri options:

hbase:mutable?family=name&qualifer=first&valueType=java.lang.String&family=address&qualifer=number&valueType2=java.lang.Integer&rowType=java.lang.Long

The example above will create a model object that is consisted of the specified fields and the scan results will populate the model object with values. Finally the mapping strategy will be used to map this model to the camel message.

HBase Idempotent repository

The camel-hbase component also provides an idempotent repository which can be used when you want to make sure that each message is processed only once. The HBase idempotent repository is configured with a table, a column family and a column qualifier and will create to that table a row per message.

HBaseConfiguration configuration = HBaseConfiguration.create();
HBaseIdempotentRepository repository = new HBaseIdempotentRepository(configuration, tableName, family, qualifier);

from("direct:in")
  .idempotentConsumer(header("messageId"), repository)
  .to("log:out);

HBase Mapping

It was mentioned above that you the default mapping strategies are header and body mapping.
Below you can find some detailed examples of how each mapping strategy works.

HBase Header mapping Examples

The header mapping is the default mapping. To put the value "myvalue" into HBase row "myrow" and column "myfamily:mycolum" the message should contain the following headers:

Header Value

CamelHBaseRowId

myrow

CamelHBaseFamily

myfamily

CamelHBaseQualifier

myqualifier

CamelHBaseValue

myvalue

To put more values for different columns and / or different rows you can specify additional headers suffixed with the index of the headers, e.g:

Header Value

CamelHBaseRowId

myrow

CamelHBaseFamily

myfamily

CamelHBaseQualifier

myqualifier

CamelHBaseValue

myvalue

CamelHBaseRowId2

myrow2

CamelHBaseFamily2

myfamily

CamelHBaseQualifier2

myqualifier

CamelHBaseValue2

myvalue2

In the case of retrieval operations such as get or scan you can also specify for each column the type that you want the data to be converted to. For exampe:

Header Value

CamelHBaseFamily

myfamily

CamelHBaseQualifier

myqualifier

CamelHBaseValueType

Long

Please note that in order to avoid boilerplate headers that are considered constant for all messages, you can also specify them as part of the endpoint uri, as you will see below.

Body mapping Examples

In order to use the body mapping strategy you will have to specify the option mappingStrategy as part of the uri, for example:

hbase:mytable?mappingStrategyName=body

To use the body mapping strategy the body needs to contain an instance of org.apache.camel.component.hbase.model.HBaseData. You can construct t

HBaseData data = new HBaseData();
HBaseRow row = new HBaseRow();
row.setId("myRowId");
HBaseCell cell = new HBaseCell();
cell.setFamily("myfamily");
cell.setQualifier("myqualifier");
cell.setValue("myValue");
row.getCells().add(cell);
data.addRows().add(row);

The object above can be used for example in a put operation and will result in creating or updating the row with id myRowId and add the value myvalue to the column myfamily:myqualifier.
The body mapping strategy might not seem very appealing at first. The advantage it has over the header mapping strategy is that the HBaseData object can be easily converted to or from xml/json.

Spring Boot Auto-Configuration

When using hbase with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-hbase-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 6 options, which are listed below.

Name Description Default Type

camel.component.hbase.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.hbase.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.hbase.configuration

To use the shared configuration. The option is a org.apache.hadoop.conf.Configuration type.

Configuration

camel.component.hbase.enabled

Whether to enable auto configuration of the hbase component. This is enabled by default.

Boolean

camel.component.hbase.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.hbase.pool-max-size

Maximum number of references to keep for each table in the HTable pool. The default value is 10.

10

Integer